ScreedPro Installer

About Screedpro

No need to mix screed or self level by hand ever again.

ScreedPro consists of a nationwide fleet of over 20 screed pump trucks pumping high performance floor screed and self level for tilers, flooring contractors and builders on construction projects across Melbourne.

Give us a call or contact us to discuss your project needs.

Are you ready to Get Pumped?

Melbourne's floor screeding specialist

Safe Surface Preparation Flooring are proud partners and in collaboration with Australia’s leading flooring preparation supplier, ScreedPro, who through their impressive fleet of performance flooring trucks. they have brought innovative solutions of high volume, high quality, safety, low cost bulk manufacturing and supply of screed and self leveling services.

Safe Surface Preparation and ScreedPro together have been playing a key role in offering self-levelling services and products that are developed to pump concrete to virtually any distance and height for the commercial and industrial sectors across Melbourne.

For more information or how we can look at serving your next project get in touch with our team today.

TECHNICAL INFORMATION

Our Levelling Products

Which self-level screed is best for my project? Choose the right self-level screed with us today

product-list-logo

ScreedMax Level Pro

A high-performance, self-levelling screed formulated for rapid installation and a smooth, level surface. It represents a balance between cost-effectiveness and performance.

Capabilities

  • Suitable for a wide range of applications: Ideal for projects where a fast-drying, smooth finish is required, but where the load-bearing requirements are moderate.
  • Cost-effective solution: Offers a balance between speed and cost-effectiveness.
  • Excellent for smaller projects: Well-suited for smaller areas or projects with less demanding load-bearing requirements.

Limitations

  • Not suitable for underfloor heating
  • Not suitable for hydronic water heating systems
  • Not suitable for unbonded installation
product-list-logo

ScreedMax Level Ultra

A premium, high-strength, self-levelling screed engineered for superior performance and durability. It provides enhanced strength and load-bearing capacity compared to Level Pro.

Capabilities

  • Exceptional strength and durability: Formulated for demanding applications requiring a high level of strength and resistance to cracking and wear. Specifically designed for projects needing a high compressive strength.
  • Suitable for high-traffic areas: Ideal for areas that will experience heavy foot traffic or significant loads.
  • Superior crack resistance: The enhanced formulation minimizes the risk of cracking, even under demanding conditions.
  • Premium solution for large or high-load applications: The optimal choice for larger projects or areas that will experience substantial stress.
  • Perfect for underfloor and hydronic heating systems

Limitations

  • Not suitable for unbonded installation
product-list-logo

ScreedMax Commercial

The reliable workhorse. Ideal for budget-conscious projects requiring a strong, traditional sand-cement screed suitable for tile and stone installations. It offers exceptional value and performance for a wide range of applications

  • Ideal for: Bonded installations only
  • Resilient Flooring: Suitable (tile, stone)
  • Non-resilient flooring: Not Suitable
  • Underfloor heating: Not Suitable
  • Dry Time/Turn around: 60-90 minute working time; 3-5 days for tile, 5 days for stone (with sufficient drying)
  • Strengths: Traditional, cost-effective
product-list-logo

ScreedMax Pro S20

Step up to engineered excellence. ScreedMax Pro S20 is a high-strength, engineered screed offering superior performance and versatility. Perfect for bonded installations, it provides faster drying times compared to traditional screeds and is suitable for tile and stone.

  • Ideal for: Primarily bonded installations. Suitable for non-resilient flooring. Unbonded applications may be considered for thicknesses over 40mm if the substrate is stable and a suitable separating layer is used, but this is less common than with the S30
  • Resilient Flooring: Not Suitable
  • Non-resilient flooring: Suitable
  • Underfloor heating: Not Suitable
  • Dry Time/Turn around: 60-90 minute working time; 12 hours for light foot traffic, 24h for tile installation, 48 hours for stone (with sufficient drying)
  • Strengths: Cost-effective engineered solution, good strength for many applications.  Better suited for thinner, bonded installations
product-list-logo

ScreedMax Pro S30

While ScreedMax Pro S20 provides excellent performance, the ScreedMax Pro S30 takes it a step further. A Substantially higher compressive strength than S20 allows for greater flexibility in installation. While S20 is primarily suited to bonded applications, particularly for thinner screeds, S30 opens up more options for unbonded installations, especially in thicker applications (40mm+). This expands the range of projects where S30 can be successfully deployed, making it the perfect all rounder.

  • Ideal for: Bonded and unbonded installations. Its higher strength makes unbonded applications more practical for thicknesses over 40mm due to the reduced risk of cracking
  • Resilient Flooring: Suitable
  • Non-resilient flooring: Suitable
  • Underfloor heating: Suitable
  • Dry Time/Turn around: 60-90 minute working time; 12 hours for light foot traffic, 4 days for resilient coverings, 24-48 hours for non-resilient (with sufficient drying)
  • Strengths: Higher compressive strength than S20, increased suitability for thicker screeds (both bonded and unbonded), more versatile applications
product-list-logo

ScreedMax Pro K45

Top-of-the-line engineered screed for premium performance. Its exceptionally high compressive strength makes it ideal for heavy-duty applications, as well as being suitable for all floor coverings and preferred for underfloor heating. It offers faster setting times and earlier readiness for subsequent flooring installations compared to the S20/S30 options.

  • Ideal for: Bonded and unbonded installations.
  • Suitable for: All flooring types (resilient, non-resilient and underfloor heating)
  • Dry Time/Turn around: 60-90 minute working time; 12 hours light foot traffic, 24 hours for tile installation, 48 hours for stone. 5 days for resilient floor coverings.
  • Strengths: Exceptionally high strength, versatile, underfloor heating compatible.
product-list-logo

ScreedMax Air

Engineered for speed and efficiency. This innovative screed boasts a rapid setting time, minimizing project downtime. Its lightweight versatility adapts to diverse applications and provides an excellent solution when speed is paramount or load onto substrate is a concern.

  • Ideal for: Bonded and unbonded installations.
  • Resilient Flooring: Suitable
  • Non-resilient flooring: Suitable
  • Underfloor heating: Not Suitable
  • Dry Time/Turn around: 60-minute working time. 12 hours for light foot traffic, 24 hours for tiles, 48 hours for stone, 4 days for resilient & final floor coverings.
  • Strengths: Fast setting time, versatile.
Enquiry now

Have a Project?

Talk to our team today for expert advice or to get a quote for your next project.

Safe Surface Preparation team on site